Concrete Contractor in Kaleen

Concreting Canberra Pro is a concrete contractor for residential concreting at Kaleen properties. Services include concrete driveways, exposed aggregate, concrete slabs, patios and footpaths. Your quote is prepared on site at your property, and the work is carried out there too.

Request a free, no-obligation quote using the quote form, or call (02) 5114 2540.

  • Free quotesNo obligation

Residential Concreting Services

In the 2021 Census, 91.2% of Kaleen's occupied private dwellings were separate houses, compared with 63.2% for the ACT. Concreting Canberra Pro offers residential concrete services for homes, covering driveways, decorative finishes, slabs, patios and paths.

Concrete Driveways

Broom-finished concrete driveway leading to a garage

Concreting Canberra Pro builds new concrete driveways for homes. The work covers site preparation, formwork, the pour and the finish. If your driveway crosses the verge, see the ACT driveway rules section below.

Exposed Aggregate

Close-up of an exposed aggregate concrete surface

Exposed aggregate concrete is a decorative finish for driveways, paths and outdoor areas. Concreting Canberra Pro offers it as part of its residential concreting work.

Concrete Slabs and Patios

Concrete patio slab with an outdoor dining area in a backyard

Concreting Canberra Pro lays concrete slabs for outdoor areas around the home. This includes patio concrete slabs for outdoor living spaces. Shed slabs and garage slabs are also available.

Concrete Footpaths

Concrete footpath leading to the front entry of a house

Concreting Canberra Pro lays residential concrete footpaths and paths around the home. This covers paths within your property, from the front entry to the side and back of the house.

Other Concreting and Site Services

Concreting Canberra Pro also offers stamped concrete and coloured concrete as decorative finishes. House slabs are available for new homes. Concrete work around pools is covered through concrete pool surrounds. The business also builds concrete retaining walls and concrete steps. If you are replacing a driveway, the existing driveway can be removed before the new one is poured. Site preparation is also carried out ahead of a pour.

ACT Driveway Rules That Apply in Kaleen

Driveway rules in Kaleen are set by the ACT Government and apply across the whole Territory. They are not unique to Kaleen. The part of a driveway between the kerb and your property boundary sits on Territory-owned public land.

ACT Government approval is required to add a new driveway or to add a second driveway. Approval is also required to modify a driveway, including changes to its size, shape, location or surface type. The approving authority is the ACT Government through City Services, as there is no separate local council for this. You can check the requirements and apply on the ACT Government City Services driveway applications page.

These rules apply to the verge portion only, between the kerb and the property boundary. The part of the driveway inside your block is not covered by them. The FAQs below cover replacement, finishes and street trees.

Driveway Approval and Finish FAQs

Do I need approval to replace or change my driveway in Kaleen?

›

Under ACT rules that apply in Kaleen, the verge portion of a driveway sits on Territory land, so approval is needed for a new driveway, a second driveway, or changes to size, shape, location or surface type. Replacing an existing driveway like-for-like, with the same shape, size, location and surface type in plain or asphaltic concrete, does not need design approval. A formwork inspection is optional for like-for-like work. Where approval is needed, the layout review takes a minimum of 15 working days.

Can I use exposed aggregate on the verge section of my driveway?

›

On the verge section, ACT rules accept plain coloured concrete, stamped concrete, bitumen and pavers, and the concrete must be 32 MPa. Exposed aggregate is generally not recommended there, but it may be permitted with an Erosion and Sediment Control Management Plan. Polished and tiled finishes are not permitted on the verge section. These rules cover the verge section only, so the part of the driveway inside your block is not affected.

Can a driveway be built near a mature street tree?

›

For mature verge trees, ACT rules require the driveway to sit outside the greater of the tree's canopy drip line or the clearance set out in MIS 07. A Landscape Management and Protection Plan is required for any works within the Tree Protection Zone, which extends 2 m beyond the edge of the canopy.

Getting a Concrete Quote for Your Kaleen Property

Quotes from Concreting Canberra Pro are free and no-obligation, and they are given after a visit to your property. The process follows five steps:

  1. 01On-site quote:

    Your property is visited and your project is measured and priced.

  2. 02Site preparation:

    The area is cleared and readied for the concrete.

  3. 03Formwork, falls and reinforcement:

    Forms are set, falls are set for drainage, and reinforcement is placed.

  4. 04Pour and finish:

    The concrete is poured and the chosen finish is applied.

  5. 05Curing and handover:

    The concrete is left to cure before the finished work is handed over.

Kaleen is in the Belconnen district, and you can read more about concreting in Belconnen, as well as concreting in Florey and concreting in Charnwood. For work across the wider city, visit the page for Concreting Canberra Pro as a concrete contractor in Canberra.

Request a free, no-obligation on-site quote using the quote form, or call (02) 5114 2540.